Auto Parts Test Equipment Mechanical Shock Test Machine For Auto Parts Accessories
Standard:
This part of ISO 12405 specifies test procedures for lithium-ion
battery packs and systems for use in electrically propelled road
vehicles;
ISO 16750-3 Road vehicles — Environmental conditions and testing
for electrical and electronic equipment — Part 3: Mechanical loads;
IEC 60068-2-27 Environmental testing – Part 2-27: Tests – Test Ea
and guidance: Shock
Application:
Shock test is used to accurately measure the product fragility and
evaluate the protective ability of the product packaging.
It is suitable shock test for aviation, aerospace, marine,
military, consumer electronics, automobiles, home appliances and
display devices.
Mechanical shock test is applicable to packs and systems intended to be mounted at
rigid points of the body or on the frame of a vehicle.
The load occurs, for example when driving over a curb stone at high
speed. Failure mode is a mechanical damage of components due to the
resulting high accelerations.
This test applies to battery packs and systems.
Auto Parts Test Equipment
Feature:
By selecting different waveform generator, can perform half
sinusoidal wave, sawtooth wave and trapezoidal wave.
Convenient touch screen operation.
Complete safety protection system.
Utilize pneumatically/hydraulically combined booster and braking
system to prevent multiple impact.
With air spring shock absorber and hydraulic shock damping
mechanism, there will be no impact on the surrounding and no
foundation required.
Parameter:
| Model | 30 | 50 | 100 | 200 |
| Table Size (cm) | 40 x 40 | 50 x 60 | 70 x 80 | 100 x 100 |
| Max. Specimen Weight(kg) | 30 | 50 | 100 | 200 |
Max. Acceleration (G) | Half Sine | 600 | 600 | 600 | 500 |
| Saw-tooth | 100 | 100 | 100 | 100 |
| Square | | 150 | 150 | 150 |
Pulse duration (ms) | Half Sine | 300.5 | 301 | 301 | 302 |
| Saw-tooth | 186 | 186 | 186 | 186 |
| Square | | 306 | 306 | 306 |
| Machine weight(Kg) | 1900 | 2300 | 3200 | 4200 |
| Controller cabinet dimension(cm) | W55*D50*H80. Auto Parts Test Equipment |
| Power supply | 3(phase) AC380V 50/60Hz Compressed air 0.50.8MPa |
| Standards | GB/T2423-2008 GJB1217 GJB360.23 GJB150 GJB548 MIL-STD-202F
IEC-68-2-27 MIL-STD-883E MIL-STD-810F ISTA UL |
